TH85
PRECISE CUTTING AND FELLING FOR MAX PRODUCTION
TH85 is the second largest head in Logset’s TH series. Together with the Logset 12H GTE Hybrid harvester, it takes productivity to unseen levels. TH85 is designed for felling, feeding and cross-cutting trees between 80 cm and 4 cm in diameter.
technologies
technologies
HIGH PERFORMANCE
Its three feeding wheels and four hydraulic motors provide an impressive feeding force with even the most difficult trees. Its total weight of 2100 kg makes for a reliable structure in terms of chassis, knives and pivots. TH85 has all the elements needed for a great cutting experience: performance and efficiency.
Precise measuring with TOC-md
As a standard, all the heads in the TH series come with the TOC-MD measuring device. The user interface allows you to easily use and adjust features such as proportional knife control, automatic cross cutting, and feeding speed. The seamless integration of TOC-MD with the head guarantees high productivity.
Optimal Delimbing diameter
40-60 cm
Maximum felling-/cutting diameter
90 cm
feeding wheel safeguard
The feeding wheel safety guard is as a standard equipment to protect the harvester head from rocky ground, for example when lowered down. The feeding roller model is optional.
Length Measuring device
The length measuring device is firmly attached to the harvester head frame. Choose the measuring wheel model that suits your needs.
Reaction rod
The reaction rods in the feeder arms centres the woods inside the harvester head and ensures that the stem remains at the bottom of the harvester head even during a possible feeding reversal step.
delimbing knives
Robust delimbing knives are optimized for average stem size and them are lightly delimbing large, branched conifers for example.
rear delimbing knives pin
The sturdy housing structure connects both the fastening pins for the rear and front delimbing knives. The service life of the pins is long. The locking nut on the pin keeps the whole package together.
TH85
in a nutshell
tech specs
| Width – head open | 1 900 mm (74.8″) |
| Width – head closed | 1 600 mm (63″) |
| Height to top knife | 1 850 mm (72.8″) |
| Height with rotator and link | 2 400 mm (94.5″) |
| Weight with rotator and link | 2 100 kg (4 630 lbs) |
| Max. felling / cutting diameter | 800 mm (31.5″) |
| Saw bar | 950 mm (37.4″) |
| Saw unit | SuperCut 150 |
| Saw motor | Bucher 25/32 cm³ |
| Saw chain tensioning | Automatic |
| Chain oil tank volume | 8 l (2.1 US gal) |
| Max pressure | 280 bar (4 061 PSI) |
| Flow required for optimal production | 300 l/min (79.3 US gal/min) |
| Valve block | Purpose built hydraulic manifold |
| Hydraulic motors – feeding arms | 940 cm³ |
| Hydraulic motors – chassis | 470 cm³ |
| Number of hydraulic motors | 4 pcs |
| Feeding speed, 300 l/min | 4,2 m/s (13.8 ft/s) |
| Max opening – feeding wheels | 840 mm (33.1″) |
| Max opening – upper knives | 1 000 mm (39.4″) |
| Max opening – rear knives | 1 100 mm (43.3″) |
| Delimbing diameter tip to tip | 580 mm (22.8″) |
| Number of static knives | 2 pcs |
| Number of movables knives | 4 pcs |
| Max tilt angle | 150º |
| Options: | Indexator H182 |
| Device: | LOGSET TOC-MD 2 |
| Wheeled base | 25-30 t (55100 – 66140 lbs) |
| Tracked base | 22-28 t (48500 – 61730 lbs) |
Contact your local dealer for more information about options.