The Logset model TH65 is the most versatile harvester head in the Logset range. It is suitable for forests of all sizes and types, the stems of the trees were either straight or curved, and the harvester head both with deciduous trees as well as conifers. Strong frame construction withstands wear and tear.



four delimbing knives

Thanks to the four delimbing knives, the harvester head easily delimbs all branches from the base to the top of the tree. Robust delimbing knives are optimized for average stem size.


The feeding wheel safety guard is standard equipment to protect the harvester head from rocky ground, for example when lowered down. The feeding wheel can also have a cleaning comb that attaches under the guard. The comb cleans the spaces between spikes of the wheel, removing bark and resin.

Optimal Delimbing diameter
10-45 cm
Maximum felling-/cutting diameter
72 cm

feeding wheel safeguard

The feeding wheel safety guard is as a standard equipment to protect the harvester head from rocky ground, for example when lowered down. The feeding roller model is optional.

Length Measuring device

The length measuring device is firmly attached to the harvester head frame. Choose the measuring wheel model that suits your needs.

Reaction rod

The reaction rods in the feeder arms centres the woods inside the harvester head and ensures that the stem remains at the bottom of the harvester head even during a possible feeding reversal step.

delimbing knives

Robust delimbing knives are optimized for average stem size and them are lightly delimbing large, branched conifers for example.

rear delimbing knives pin

The sturdy housing structure connects both the fastening pins for the rear and front delimbing knives. The service life of the pins is long. The locking nut on the pin keeps the whole package together.


in a nutshell

tech specs

Width – head open, mm1 560 (63 in)
Width – head closed, mm1 200 (47 in)
Height to top knife, mm1 380 (54 in)
Height with rotator and link, mm1 900 (75 in)
Weight with rotator and link, kg1 150 (2 535 lbs)
Max. felling / cutting diameter, mm 650 (25,6 in)
Saw bar, mm 750 (29,5 in)
Saw unit SuperCut 100 S
Saw motor Parker F11-19/ Bucher 20/25
Saw chain tensioning Hydraulic
Chain oil tank volume, l 8 (2,1 US gal)
Max pressure, bar280 (4 060 psi)
Flow required for optimal production, l/min300 (79,2 US gal/min)
Valve blockCustomised valve block
Hydraulic motors – feeding arms, cm³620/820
Hydraulic motors – chassis, cm³315/400
Number of hydraulic motors, pcs4
Feeding speed, m/s (300 l/min)6,0/4,7 (19,7/15,4 ft/s)
Max opening – feeding wheels, mm630 (24,8 in)
Max opening – upper knives, mm680 (26,8 in)
Max opening – rear knives, mm840 (33 in)
Delimbing diameter tip to tip, mm450 (17,7 in)
Number of static knives, pcs1
Number of movables knives, pcs4
Max tilt angle, º140
Options:Indexator AV12-17/ H122-182, Black Bruin BBR 15-16
Wheeled base, t14-18 (31 000 – 39 700 lbs)
Tracked base, t18-20 (36 000 – 44 000 lbs)

Contact your local dealer for more information about options.