TH55
Lightweight head for midsized harvesters
TH55 is a light, compact and highly productive harvester head designed especially for thinning operations and clear felling of midsized timber. The lightweight TH55 is an excellent choice for midsized harvesters with long out-reach cranes. The three-roller synchronized feed system ensures a powerful and precise feeding in all conditions.
technologies
technologies
Great results on bent timber
TH55 performs perfectly on bent timber because of its long front knives equipped with parallel rod, its large tilt angle and short frame.


PRECISE In all conditions
The diameter of the timber is measured from the front knives with two sensors, which guarantees a reliable diameter measurement. The fully hydraulic length-measuring wheel, with a possibility to adjust the pressure, together with a wide range of different length measuring wheel options ensure a precise length measurement in all conditions.

Optimal Delimbing diameter
10-40 cm
Maximum felling-/cutting diameter
65 cm

feeding wheel safeguard
The feeding wheel safety guard is as a standard equipment to protect the harvester head from rocky ground, for example when lowered down. The feeding roller model is optional.

Length Measuring device
The length measuring device is firmly attached to the harvester head frame. Choose the measuring wheel model that suits your needs.

Reaction rod
The reaction rods in the feeder arms centres the woods inside the harvester head and ensures that the stem remains at the bottom of the harvester head even during a possible feeding reversal step.

delimbing knives
Robust delimbing knives are optimized for average stem size and them are lightly delimbing large, branched conifers for example.

rear delimbing knives pin
The sturdy housing structure connects both the fastening pins for the rear and front delimbing knives. The service life of the pins is long. The locking nut on the pin keeps the whole package together.
TH55
in a nutshell
tech specs
Width – head open, mm | 1 420 (56 in) |
Width – head closed, mm | 1 200 (47 in) |
Height to top knife, mm | 1 300 (51 in) |
Height with rotator and link, mm | 1 820 (72 in) |
Weight with rotator and link, kg | 1 000 (2 205 lbs) |
Max. felling / cutting diameter, mm | 650 (25,6 in) |
Saw bar, mm | 750 (29,5 in) |
Saw unit | SuperCut 100 |
Saw motor | Parker F11-19 / Bucher 20/25 |
Saw chain tensioning | Hydraulic |
Chain oil tank volume, l | 8 (2,1 US gal) |
Max pressure, bar | 280 (4 060 psi) |
Flow required for optimal production, l/min | 240 (63 US gal/min) |
Valve block | Purpose built hydraulic manifold |
Hydraulic motors – feeding arms, cm³ | 400/500 |
Hydraulic motors – chassis, cm³ | 250/315 |
Number of hydraulic motors, pcs | 4 |
Feeding speed, m/s (300 l/min) | 6,0/4,7 (19,7/15,4 ft/s) |
Max opening – feeding wheels, mm | 630 (24,8 in) |
Max opening – upper knives, mm | 680 (26,8 in) |
Max opening – rear knives, mm | – |
Delimbing diameter tip to tip, mm | 450 (17,7 in) |
Number of static knives, pcs | 1 |
Number of movables knives, pcs | 3 |
Max tilt angle, º | 140 |
Options: | Indexator AV12-17/H122-182, Black Bruin BBR 15-16 |
Device: | LOGSET MD2 |
Wheeled base, t | 14-18 (31 000 – 39 700 lbs) |
Tracked base, t | 16-20 (35 000 – 44 000 lbs) |
Contact your local dealer for more information about options.