TH95
HEAVY-DUTY HEAD FOR LARGE VOLUMES
TH95 is the largest head in the TH series. It is a genuinely heavy-duty harvester head for harvesting and processing large volumes. Its compact structure and versatility make it suitable for many kinds of logging operations.
technologies
technologies
Guaranteed efficiency
The chassis and delimbing knives create minimal friction against the tree stem. The reduced stress during feeding means that the fuel consumption is low and the engine and hydraulic components have a longer lifespan. The geometry of the feeding arms and delimbing knives is optimized for large and heavy timber. This guarantees efficient feeding of even bent and heavily branched trees.


Precise measuring with TOC-md
As a standard, all the heads in the TH series come with the TOC-MD measuring device. TH95 works seamlessly with TOC-MD. This union of strength and intelligence provides reliable measurements, easy adjustments and unbeatable productivity.

Optimal Delimbing diameter
40-60 cm
Maximum felling-/cutting diameter
90 cm

feeding wheel safeguard
The feeding wheel safety guard is as a standard equipment to protect the harvester head from rocky ground, for example when lowered down. The feeding roller model is optional.

Length Measuring device
The length measuring device is firmly attached to the harvester head frame. Choose the measuring wheel model that suits your needs.

Reaction rod
The reaction rods in the feeder arms centres the woods inside the harvester head and ensures that the stem remains at the bottom of the harvester head even during a possible feeding reversal step.

delimbing knives
Robust delimbing knives are optimized for average stem size and them are lightly delimbing large, branched conifers for example.

rear delimbing knives pin
The sturdy housing structure connects both the fastening pins for the rear and front delimbing knives. The service life of the pins is long. The locking nut on the pin keeps the whole package together.
TH95
in a nutshell
tech specs
Width – head open, mm | 2 040 (80 in) |
Width – head closed, mm | 1 640 (65 in) |
Height to top knife, mm | 2 070 (81 in) |
Height with rotator and link, mm | 2 700 (106 in) |
Weight with rotator and link, kg | 2 900 (6 390 lbs) |
Max. felling / cutting diameter, mm | 900 (35 in) |
Saw bar, mm | 1 000 (39 in) |
Saw unit | SuperCut 300 |
Saw motor | Parker F12-40 |
Saw chain tensioning | Hydraulic |
Chain oil tank volume, l | 18 (5 US gal) |
Max pressure, bar | 280 (4 060 psi) |
Flow required for optimal production, l/min | 300 (79 US gal/min) |
Valve block | Purpose built hydraulic manifold |
Hydraulic motors – feeding arms, cm³ | 1 120 |
Hydraulic motors – chassis, cm³ | 500 |
Number of hydraulic motors, pcs | 4 |
Feeding speed, m/s (300 l/min) | 3,9 (13 ft/s) |
Max opening – feeding wheels, mm | 880 (35 in) |
Max opening – upper knives, mm | 1 040 (41 in) |
Max opening – rear knives, mm | 1 200 (47 in) |
Delimbing diameter tip to tip, mm | 620 (24 in) |
Number of static knives, pcs | 2 |
Number of movables knives, pcs | 4 |
Max tilt angle, º | 144 |
Options: | Indexator IR12 |
Device: | LOGSET TOC MD2 |
Wheeled base, t | – |
Tracked base, t | 30 (66 000 lbs) |
Contact your local dealer for more information about options.